Sync from host to virtual

Supported Configurations

Running the control plane as a container with:

• Shared Nodes

Read more about how syncing works before deciding which resources to sync from the control plane cluster to the tenant cluster.

vCluster can sync certain resources from the host cluster to make them available inside the virtual cluster, but when these resources are synced, they are only synced in read-only mode. No changes to the resource in the virtual cluster syncs back to the host cluster as the resources are shared across the host cluster.

A good example would be nodes, which are nice to view inside the virtual cluster and can be also used to enabled certain features such as scheduling inside the vCluster, but you wouldn't want your virtual cluster to change the node itself. Another benefit of only syncing from host is that vCluster itself only requires read-only RBAC permissions.

vCluster also allows to sync custom resources via the custom resource definitions syncer

There are a couple of labels that are created on the host cluster by vCluster that never get synced to the virtual cluster resource. These labels are:

• release (Label is needed to avoid conflicts with the vCluster pods themselves).
• vcluster.loft.sh/namespace
• vcluster.loft.sh/managed-by
• vcluster.loft.sh/controlled-by
• vcluster.loft.sh/ns-label-* These labels are added as management labels when synching from the virtual cluster to the host cluster, but skipped when syncing from the host cluster to the virtual cluster to prevent sync loops.

Resource creation behavior

Cluster-scoped resources

The following resources are not created during sync if they don’t already exist in the virtual cluster:

• CSINodes
• CSIDrivers

The following resouces are created in the virtual cluster as read-only if they don't already exist during the sync:

• Nodes
• IngressClasses
• StorageClasses
• Cluster-scoped CustomResources

Namespaced resources

Namespaced resources are automatically created in the virtual cluster if they do not already exist. Before synchronization occurs, the mapping between the host cluster source namespace name and the corresponding virtual cluster target namespace name must be defined. This applies to:

• Events
• ConfigMaps
• Secrets
• Namespace-scoped CustomResources

For CSIStorageCapacities, synchronization occurs only when a corresponding mapping exists between the physical StorageClass name in the host cluster and the StorageClass name in the virtual cluster and the capacity aligns with the associated physical node:

• CSIStorageCapacities

Enabled by default

• Events

Disabled by default

• CustomResources
• Nodes
• IngressClasses
• StorageClasses
• CSINodes
• CSIDrivers
• CSIStorageCapacities
• ConfigMaps
• Secrets

No bi-directional syncing

Since syncing resources from the host cluster is in read only mode and changes in the virtual cluster do not get applied to the resource in the host cluster, bi-directional syncing does not exist across these resources.

Config reference

fromHost object

Configure what resources vCluster should sync from the host cluster to the virtual cluster.

nodes object

Nodes defines if nodes should get synced from the host cluster to the virtual cluster, but not back.

enabled boolean false

Enabled specifies if syncing real nodes should be enabled. If this is disabled, vCluster will create fake nodes instead.

syncBackChanges boolean false

SyncBackChanges enables syncing labels and taints from the virtual cluster to the host cluster. If this is enabled someone within the virtual cluster will be able to change the labels and taints of the host cluster node.

clearImageStatus boolean false

ClearImageStatus will erase the image status when syncing a node. This allows to hide images that are pulled by the node.

selector object

Selector can be used to define more granular what nodes should get synced from the host cluster to the virtual cluster.

all boolean false

All specifies if all nodes should get synced by vCluster from the host to the virtual cluster or only the ones where pods are assigned to.

labels object {}

Labels are the node labels used to sync nodes from host cluster to virtual cluster. This will also set the node selector when syncing a pod from virtual cluster to host cluster to the same value.

patches object[]

Patches patch the resource according to the provided specification.

path required string

Path is the path within the patch to target. If the path is not found within the patch, the patch is not applied.

expression string

Expression transforms the value according to the given JavaScript expression.

reverseExpression string

ReverseExpression transforms the value according to the given JavaScript expression.

reference object

Reference treats the path value as a reference to another object and will rewrite it based on the chosen mode automatically. In single-namespace mode this will translate the name to "vxxxxxxxxx" to avoid conflicts with other names, in multi-namespace mode this will not translate the name.

apiVersion required string

APIVersion is the apiVersion of the referenced object.

apiVersionPath string

APIVersionPath is optional relative path to use to determine the kind. If APIVersionPath is not found, will fallback to apiVersion.

kind required string

Kind is the kind of the referenced object.

kindPath string

KindPath is the optional relative path to use to determine the kind. If KindPath is not found, will fallback to kind.

namePath string

NamePath is the optional relative path to the reference name within the object.

namespacePath string

NamespacePath is the optional relative path to the reference namespace within the object. If omitted or not found, namespacePath equals to the metadata.namespace path of the object.

labels object

Labels treats the path value as a labels selector.

events object

Events defines if events should get synced from the host cluster to the virtual cluster, but not back.

enabled boolean true

Enabled defines if this option should be enabled.

patches object[]

Patches patch the resource according to the provided specification.

path required string

Path is the path within the patch to target. If the path is not found within the patch, the patch is not applied.

expression string

Expression transforms the value according to the given JavaScript expression.

reverseExpression string

ReverseExpression transforms the value according to the given JavaScript expression.

reference object

Reference treats the path value as a reference to another object and will rewrite it based on the chosen mode automatically. In single-namespace mode this will translate the name to "vxxxxxxxxx" to avoid conflicts with other names, in multi-namespace mode this will not translate the name.

apiVersion required string

APIVersion is the apiVersion of the referenced object.

apiVersionPath string

APIVersionPath is optional relative path to use to determine the kind. If APIVersionPath is not found, will fallback to apiVersion.

kind required string

Kind is the kind of the referenced object.

kindPath string

KindPath is the optional relative path to use to determine the kind. If KindPath is not found, will fallback to kind.

namePath string

NamePath is the optional relative path to the reference name within the object.

namespacePath string

NamespacePath is the optional relative path to the reference namespace within the object. If omitted or not found, namespacePath equals to the metadata.namespace path of the object.

labels object

Labels treats the path value as a labels selector.

ingressClasses object

IngressClasses defines if ingress classes should get synced from the host cluster to the virtual cluster, but not back.

enabled boolean false

Enabled defines if this option should be enabled.

patches object[]

Patches patch the resource according to the provided specification.

path required string

Path is the path within the patch to target. If the path is not found within the patch, the patch is not applied.

expression string

Expression transforms the value according to the given JavaScript expression.

reverseExpression string

ReverseExpression transforms the value according to the given JavaScript expression.

reference object

Reference treats the path value as a reference to another object and will rewrite it based on the chosen mode automatically. In single-namespace mode this will translate the name to "vxxxxxxxxx" to avoid conflicts with other names, in multi-namespace mode this will not translate the name.

apiVersion required string

APIVersion is the apiVersion of the referenced object.

apiVersionPath string

APIVersionPath is optional relative path to use to determine the kind. If APIVersionPath is not found, will fallback to apiVersion.

kind required string

Kind is the kind of the referenced object.

kindPath string

KindPath is the optional relative path to use to determine the kind. If KindPath is not found, will fallback to kind.

namePath string

NamePath is the optional relative path to the reference name within the object.

namespacePath string

NamespacePath is the optional relative path to the reference namespace within the object. If omitted or not found, namespacePath equals to the metadata.namespace path of the object.

labels object

Labels treats the path value as a labels selector.

selector object

Selector defines the selector to use for the resource. If not set, all resources of that type will be synced.

matchLabels object

matchExpressions object[]

key string

operator string

values string[]

runtimeClasses object

RuntimeClasses defines if runtime classes should get synced from the host cluster to the virtual cluster, but not back.

enabled boolean false

Enabled defines if this option should be enabled.

patches object[]

Patches patch the resource according to the provided specification.

path required string

Path is the path within the patch to target. If the path is not found within the patch, the patch is not applied.

expression string

Expression transforms the value according to the given JavaScript expression.

reverseExpression string

ReverseExpression transforms the value according to the given JavaScript expression.

reference object

Reference treats the path value as a reference to another object and will rewrite it based on the chosen mode automatically. In single-namespace mode this will translate the name to "vxxxxxxxxx" to avoid conflicts with other names, in multi-namespace mode this will not translate the name.

apiVersion required string

APIVersion is the apiVersion of the referenced object.

apiVersionPath string

APIVersionPath is optional relative path to use to determine the kind. If APIVersionPath is not found, will fallback to apiVersion.

kind required string

Kind is the kind of the referenced object.

kindPath string

KindPath is the optional relative path to use to determine the kind. If KindPath is not found, will fallback to kind.

namePath string

NamePath is the optional relative path to the reference name within the object.

namespacePath string

NamespacePath is the optional relative path to the reference namespace within the object. If omitted or not found, namespacePath equals to the metadata.namespace path of the object.

labels object

Labels treats the path value as a labels selector.

selector object

Selector defines the selector to use for the resource. If not set, all resources of that type will be synced.

matchLabels object

matchExpressions object[]

key string

operator string

values string[]

priorityClasses object

PriorityClasses defines if priority classes classes should get synced from the host cluster to the virtual cluster, but not back.

enabled boolean false

Enabled defines if this option should be enabled.

patches object[]

Patches patch the resource according to the provided specification.

path required string

Path is the path within the patch to target. If the path is not found within the patch, the patch is not applied.

expression string

Expression transforms the value according to the given JavaScript expression.

reverseExpression string

ReverseExpression transforms the value according to the given JavaScript expression.

reference object

Reference treats the path value as a reference to another object and will rewrite it based on the chosen mode automatically. In single-namespace mode this will translate the name to "vxxxxxxxxx" to avoid conflicts with other names, in multi-namespace mode this will not translate the name.

apiVersion required string

APIVersion is the apiVersion of the referenced object.

apiVersionPath string

APIVersionPath is optional relative path to use to determine the kind. If APIVersionPath is not found, will fallback to apiVersion.

kind required string

Kind is the kind of the referenced object.

kindPath string

KindPath is the optional relative path to use to determine the kind. If KindPath is not found, will fallback to kind.

namePath string

NamePath is the optional relative path to the reference name within the object.

namespacePath string

NamespacePath is the optional relative path to the reference namespace within the object. If omitted or not found, namespacePath equals to the metadata.namespace path of the object.

labels object

Labels treats the path value as a labels selector.

selector object

Selector defines the selector to use for the resource. If not set, all resources of that type will be synced.

matchLabels object

matchExpressions object[]

key string

operator string

values string[]

storageClasses object

StorageClasses defines if storage classes should get synced from the host cluster to the virtual cluster, but not back. If auto, is automatically enabled when the virtual scheduler is enabled.

enabled string|boolean auto

Enabled defines if this option should be enabled.

patches object[]

Patches patch the resource according to the provided specification.

path required string

Path is the path within the patch to target. If the path is not found within the patch, the patch is not applied.

expression string

Expression transforms the value according to the given JavaScript expression.

reverseExpression string

ReverseExpression transforms the value according to the given JavaScript expression.

reference object

Reference treats the path value as a reference to another object and will rewrite it based on the chosen mode automatically. In single-namespace mode this will translate the name to "vxxxxxxxxx" to avoid conflicts with other names, in multi-namespace mode this will not translate the name.

apiVersion required string

APIVersion is the apiVersion of the referenced object.

apiVersionPath string

APIVersionPath is optional relative path to use to determine the kind. If APIVersionPath is not found, will fallback to apiVersion.

kind required string

Kind is the kind of the referenced object.

kindPath string

KindPath is the optional relative path to use to determine the kind. If KindPath is not found, will fallback to kind.

namePath string

NamePath is the optional relative path to the reference name within the object.

namespacePath string

NamespacePath is the optional relative path to the reference namespace within the object. If omitted or not found, namespacePath equals to the metadata.namespace path of the object.

labels object

Labels treats the path value as a labels selector.

selector object

Selector defines the selector to use for the resource. If not set, all resources of that type will be synced.

matchLabels object

matchExpressions object[]

key string

operator string

values string[]

csiNodes object

CSINodes defines if csi nodes should get synced from the host cluster to the virtual cluster, but not back. If auto, is automatically enabled when the virtual scheduler is enabled.

enabled string|boolean auto

Enabled defines if this option should be enabled.

patches object[]

Patches patch the resource according to the provided specification.

path required string

Path is the path within the patch to target. If the path is not found within the patch, the patch is not applied.

expression string

Expression transforms the value according to the given JavaScript expression.

reverseExpression string

ReverseExpression transforms the value according to the given JavaScript expression.

reference object

Reference treats the path value as a reference to another object and will rewrite it based on the chosen mode automatically. In single-namespace mode this will translate the name to "vxxxxxxxxx" to avoid conflicts with other names, in multi-namespace mode this will not translate the name.

apiVersion required string

APIVersion is the apiVersion of the referenced object.

apiVersionPath string

APIVersionPath is optional relative path to use to determine the kind. If APIVersionPath is not found, will fallback to apiVersion.

kind required string

Kind is the kind of the referenced object.

kindPath string

KindPath is the optional relative path to use to determine the kind. If KindPath is not found, will fallback to kind.

namePath string

NamePath is the optional relative path to the reference name within the object.

namespacePath string

NamespacePath is the optional relative path to the reference namespace within the object. If omitted or not found, namespacePath equals to the metadata.namespace path of the object.

labels object

Labels treats the path value as a labels selector.

csiDrivers object

CSIDrivers defines if csi drivers should get synced from the host cluster to the virtual cluster, but not back. If auto, is automatically enabled when the virtual scheduler is enabled.

enabled string|boolean auto

Enabled defines if this option should be enabled.

patches object[]

Patches patch the resource according to the provided specification.

path required string

Path is the path within the patch to target. If the path is not found within the patch, the patch is not applied.

expression string

Expression transforms the value according to the given JavaScript expression.

reverseExpression string

ReverseExpression transforms the value according to the given JavaScript expression.

reference object

Reference treats the path value as a reference to another object and will rewrite it based on the chosen mode automatically. In single-namespace mode this will translate the name to "vxxxxxxxxx" to avoid conflicts with other names, in multi-namespace mode this will not translate the name.

apiVersion required string

APIVersion is the apiVersion of the referenced object.

apiVersionPath string

APIVersionPath is optional relative path to use to determine the kind. If APIVersionPath is not found, will fallback to apiVersion.

kind required string

Kind is the kind of the referenced object.

kindPath string

KindPath is the optional relative path to use to determine the kind. If KindPath is not found, will fallback to kind.

namePath string

NamePath is the optional relative path to the reference name within the object.

namespacePath string

NamespacePath is the optional relative path to the reference namespace within the object. If omitted or not found, namespacePath equals to the metadata.namespace path of the object.

labels object

Labels treats the path value as a labels selector.

csiStorageCapacities object

CSIStorageCapacities defines if csi storage capacities should get synced from the host cluster to the virtual cluster, but not back. If auto, is automatically enabled when the virtual scheduler is enabled.

enabled string|boolean auto

Enabled defines if this option should be enabled.

patches object[]

Patches patch the resource according to the provided specification.

path required string

Path is the path within the patch to target. If the path is not found within the patch, the patch is not applied.

expression string

Expression transforms the value according to the given JavaScript expression.

reverseExpression string

ReverseExpression transforms the value according to the given JavaScript expression.

reference object

Reference treats the path value as a reference to another object and will rewrite it based on the chosen mode automatically. In single-namespace mode this will translate the name to "vxxxxxxxxx" to avoid conflicts with other names, in multi-namespace mode this will not translate the name.

apiVersion required string

APIVersion is the apiVersion of the referenced object.

apiVersionPath string

APIVersionPath is optional relative path to use to determine the kind. If APIVersionPath is not found, will fallback to apiVersion.

kind required string

Kind is the kind of the referenced object.

kindPath string

KindPath is the optional relative path to use to determine the kind. If KindPath is not found, will fallback to kind.

namePath string

NamePath is the optional relative path to the reference name within the object.

namespacePath string

NamespacePath is the optional relative path to the reference namespace within the object. If omitted or not found, namespacePath equals to the metadata.namespace path of the object.

labels object

Labels treats the path value as a labels selector.

customResources {key: object}

CustomResources defines what custom resources should get synced read-only to the virtual cluster from the host cluster. vCluster will automatically add any required RBAC to the vCluster cluster role.

enabled required boolean

Enabled defines if this option should be enabled.

scope required string

Scope defines the scope of the resource

patches object[]

Patches patch the resource according to the provided specification.

path required string

Path is the path within the patch to target. If the path is not found within the patch, the patch is not applied.

expression string

Expression transforms the value according to the given JavaScript expression.

reverseExpression string

ReverseExpression transforms the value according to the given JavaScript expression.

reference object

Reference treats the path value as a reference to another object and will rewrite it based on the chosen mode automatically. In single-namespace mode this will translate the name to "vxxxxxxxxx" to avoid conflicts with other names, in multi-namespace mode this will not translate the name.

apiVersion required string

APIVersion is the apiVersion of the referenced object.

apiVersionPath string

APIVersionPath is optional relative path to use to determine the kind. If APIVersionPath is not found, will fallback to apiVersion.

kind required string

Kind is the kind of the referenced object.

kindPath string

KindPath is the optional relative path to use to determine the kind. If KindPath is not found, will fallback to kind.

namePath string

NamePath is the optional relative path to the reference name within the object.

namespacePath string

NamespacePath is the optional relative path to the reference namespace within the object. If omitted or not found, namespacePath equals to the metadata.namespace path of the object.

labels object

Labels treats the path value as a labels selector.

mappings object

Mappings for Namespace and Object

byName object

ByName is a map of host-object-namespace/host-object-name: virtual-object-namespace/virtual-object-name. There are several wildcards supported:

1. To match all objects in host namespace and sync them to different namespace in vCluster: byName: "foo/": "foo-in-virtual/"
2. To match specific object in the host namespace and sync it to the same namespace with the same name: byName: "foo/my-object": "foo/my-object"
3. To match specific object in the host namespace and sync it to the same namespace with different name: byName: "foo/my-object": "foo/my-virtual-object"
4. To match all objects in the vCluster host namespace and sync them to a different namespace in vCluster: byName: "": "my-virtual-namespace/*"
5. To match specific objects in the vCluster host namespace and sync them to a different namespace in vCluster: byName: "/my-object": "my-virtual-namespace/my-object"

volumeSnapshotClasses object

VolumeSnapshotClasses defines if volume snapshot classes created within the virtual cluster should get synced to the host cluster.

enabled boolean false

Enabled defines if this option should be enabled.

patches object[]

Patches patch the resource according to the provided specification.

path required string

Path is the path within the patch to target. If the path is not found within the patch, the patch is not applied.

expression string

Expression transforms the value according to the given JavaScript expression.

reverseExpression string

ReverseExpression transforms the value according to the given JavaScript expression.

reference object

Reference treats the path value as a reference to another object and will rewrite it based on the chosen mode automatically. In single-namespace mode this will translate the name to "vxxxxxxxxx" to avoid conflicts with other names, in multi-namespace mode this will not translate the name.

apiVersion required string

APIVersion is the apiVersion of the referenced object.

apiVersionPath string

APIVersionPath is optional relative path to use to determine the kind. If APIVersionPath is not found, will fallback to apiVersion.

kind required string

Kind is the kind of the referenced object.

kindPath string

KindPath is the optional relative path to use to determine the kind. If KindPath is not found, will fallback to kind.

namePath string

NamePath is the optional relative path to the reference name within the object.

namespacePath string

NamespacePath is the optional relative path to the reference namespace within the object. If omitted or not found, namespacePath equals to the metadata.namespace path of the object.

labels object

Labels treats the path value as a labels selector.

configMaps object

ConfigMaps defines if config maps in the host should get synced to the virtual cluster.

enabled boolean false

Enabled defines if this option should be enabled.

patches object[]

Patches patch the resource according to the provided specification.

path required string

Path is the path within the patch to target. If the path is not found within the patch, the patch is not applied.

expression string

Expression transforms the value according to the given JavaScript expression.

reverseExpression string

ReverseExpression transforms the value according to the given JavaScript expression.

reference object

Reference treats the path value as a reference to another object and will rewrite it based on the chosen mode automatically. In single-namespace mode this will translate the name to "vxxxxxxxxx" to avoid conflicts with other names, in multi-namespace mode this will not translate the name.

apiVersion required string

APIVersion is the apiVersion of the referenced object.

apiVersionPath string

APIVersionPath is optional relative path to use to determine the kind. If APIVersionPath is not found, will fallback to apiVersion.

kind required string

Kind is the kind of the referenced object.

kindPath string

KindPath is the optional relative path to use to determine the kind. If KindPath is not found, will fallback to kind.

namePath string

NamePath is the optional relative path to the reference name within the object.

namespacePath string

NamespacePath is the optional relative path to the reference namespace within the object. If omitted or not found, namespacePath equals to the metadata.namespace path of the object.

labels object

Labels treats the path value as a labels selector.

mappings object

Mappings for Namespace and Object

byName object {}

ByName is a map of host-object-namespace/host-object-name: virtual-object-namespace/virtual-object-name. There are several wildcards supported:

1. To match all objects in host namespace and sync them to different namespace in vCluster: byName: "foo/": "foo-in-virtual/"
2. To match specific object in the host namespace and sync it to the same namespace with the same name: byName: "foo/my-object": "foo/my-object"
3. To match specific object in the host namespace and sync it to the same namespace with different name: byName: "foo/my-object": "foo/my-virtual-object"
4. To match all objects in the vCluster host namespace and sync them to a different namespace in vCluster: byName: "": "my-virtual-namespace/*"
5. To match specific objects in the vCluster host namespace and sync them to a different namespace in vCluster: byName: "/my-object": "my-virtual-namespace/my-object"

secrets object

Secrets defines if secrets in the host should get synced to the virtual cluster.

enabled boolean false

Enabled defines if this option should be enabled.

patches object[]

Patches patch the resource according to the provided specification.

path required string

Path is the path within the patch to target. If the path is not found within the patch, the patch is not applied.

expression string

Expression transforms the value according to the given JavaScript expression.

reverseExpression string

ReverseExpression transforms the value according to the given JavaScript expression.

reference object

Reference treats the path value as a reference to another object and will rewrite it based on the chosen mode automatically. In single-namespace mode this will translate the name to "vxxxxxxxxx" to avoid conflicts with other names, in multi-namespace mode this will not translate the name.

apiVersion required string

APIVersion is the apiVersion of the referenced object.

apiVersionPath string

APIVersionPath is optional relative path to use to determine the kind. If APIVersionPath is not found, will fallback to apiVersion.

kind required string

Kind is the kind of the referenced object.

kindPath string

KindPath is the optional relative path to use to determine the kind. If KindPath is not found, will fallback to kind.

namePath string

NamePath is the optional relative path to the reference name within the object.

namespacePath string

NamespacePath is the optional relative path to the reference namespace within the object. If omitted or not found, namespacePath equals to the metadata.namespace path of the object.

labels object

Labels treats the path value as a labels selector.

mappings object

Mappings for Namespace and Object

byName object {}

ByName is a map of host-object-namespace/host-object-name: virtual-object-namespace/virtual-object-name. There are several wildcards supported:

1. To match all objects in host namespace and sync them to different namespace in vCluster: byName: "foo/": "foo-in-virtual/"
2. To match specific object in the host namespace and sync it to the same namespace with the same name: byName: "foo/my-object": "foo/my-object"
3. To match specific object in the host namespace and sync it to the same namespace with different name: byName: "foo/my-object": "foo/my-virtual-object"
4. To match all objects in the vCluster host namespace and sync them to a different namespace in vCluster: byName: "": "my-virtual-namespace/*"
5. To match specific objects in the vCluster host namespace and sync them to a different namespace in vCluster: byName: "/my-object": "my-virtual-namespace/my-object"

deviceClasses object

DeviceClasses defines if device classes in the host should get synced to the virtual cluster

enabled boolean false

Enabled defines if this option should be enabled.

patches object[]

Patches patch the resource according to the provided specification.

path required string

Path is the path within the patch to target. If the path is not found within the patch, the patch is not applied.

expression string

Expression transforms the value according to the given JavaScript expression.

reverseExpression string

ReverseExpression transforms the value according to the given JavaScript expression.

reference object

Reference treats the path value as a reference to another object and will rewrite it based on the chosen mode automatically. In single-namespace mode this will translate the name to "vxxxxxxxxx" to avoid conflicts with other names, in multi-namespace mode this will not translate the name.

apiVersion required string

APIVersion is the apiVersion of the referenced object.

apiVersionPath string

APIVersionPath is optional relative path to use to determine the kind. If APIVersionPath is not found, will fallback to apiVersion.

kind required string

Kind is the kind of the referenced object.

kindPath string

KindPath is the optional relative path to use to determine the kind. If KindPath is not found, will fallback to kind.

namePath string

NamePath is the optional relative path to the reference name within the object.

namespacePath string

NamespacePath is the optional relative path to the reference namespace within the object. If omitted or not found, namespacePath equals to the metadata.namespace path of the object.

labels object

Labels treats the path value as a labels selector.

selector object

Selector defines the selector to use for the resource. If not set, all resources of that type will be synced.

matchLabels object

matchExpressions object[]

key string

operator string

values string[]